Pratley 67083 Compression Conversion Kit Size 1L For Aluminium Junction Boxes 14.4mm² - 15.7mm²

Pratley 67083 Description

The Pratley 67083 is a Size 1L compression conversion kit designed to fit into aluminium junction boxes. Suitable for diameters between 14.4mm² and 15.7mm².

By simply replacing the standard cone bush and inner seal bush with this compression conversion kit, the built-in gland can accommodate unarmoured cables without affecting the IP68 seal.

Pratley Armoured Cable Joint Boxes - Range Overview

Range of Configurations & Sizes
Available in three sizes, No's 0, 1 and 2 accommodate cables from 1.5mm² x 2 core to 16mm² x 3 core. Each size is available in a straight through 2-way, "T" type 3-way or right angle 4-way.

Unique Integral Glands
Being part of the box body the integral glands cut installation costs by allowing cables to be fitted directly to the Box - no drilling, tapping and fitting of extra glands is required.

Watertight and Pressure Tight
Pratley Aluminium Alloy Cable Boxes are watertight and pressure tight. Inner seals in the integral glands form a pressure tight seal with a plastic gasket and secured by four captive stainless steel screws which can also be supplied with socket heads for additional security.

Permanence Of Earth Continuity
Earth continuity is automatically obtained when S.W.A. cable is fitted. Permanence of the Earth contact is assured by the Inner Seal and rubber Waterproofing Shroud. Together these provide earthing permanence, by preventing the ingress of moisture and corrosive atmospheres which otherwise oxidise the earthing contacts. No external or internal straps are required.

Versatility
The entries to these boxes may be adapted as follows:

• Smaller Cables may be fitted by replacing the gland parts with a reducing gland. Reducing shrouds may then be fitted
• Blanking Plugs are provided for use on spare entries. Thus cables may be added or removed without destroying the watertight nature of the box.
• Unarmoured Cables can be accommodated by using Pratley Compression Conversion Kits fitted in the box entries
• Conduit Tubing in various sizes, may be fitted to the Box either directly (depending on size) or by removing the gland parts and fitting a conduit adaptor

Electrical Connections
Connections are most easily made by leaving 'tails' long enough to enable the electrician to make his connection outside the confines of the box. Pratley Terminal End Connectors and Insulating Sleeves are recommended but other suitable connectors can also be used. Once connections have been made the 'tails' are placed back in the box and the box lid secured. This ensures ease and speed of jointing.