Hager Klik Lighting Distribution System
This innovative Lighting Distribution range from Hager is the industry standard. Internet Electrical are pleased to offer the extensive range at great prices.
The market leading Klik secure lighting connection system is a modular plug-in marshalling solution for lighting systems that provides simultaneous mechanical and electrical connection in one click-in action. Designed for on-load connection & disconnection, Klik allows individual light fittings to be removed or added without affecting other fittings on the circuit.
The 3 pin moulded plugs and leads distribute switch live, neutral and earth with 4 pin providing an additional connection, normally a permanent live for emergency lighting.
Pre-wired or self-wired plugs provide a highly adaptable solution for when systems need to be altered. Klik significantly cuts down on installation time by limiting the testing requirements at the commissioning stage.
Please select a subcategory below
Subcategories
-
click to viewKlik Lighting Distribution Boxes
Klik marshalling boxes are used in conjunction with Klik 3 and 4 pin plugs to connect luminaires within an area. The Klik marshalling box can be separated into two independently switched circuits. These circuits can be controlled via wall switch or occupancy sensor.
-
click to viewKlik Plugs, Ceiling Roses & Socket Outlets
Klik 3 pin and 4 pin plugs and ceiling roses offer a pluggable connection to luminaires. Plugs are used to connect into Klik 3 & 4 pin sockets while plug-in ceiling roses enable the luminaire to be connected and disconnected under load.
-
click to viewKlik Lighting Pre-Wired Plug-In Ceiling Roses 6A
Klik 6A 3-pin pre-wired plug-in ceiling roses are used to connect luminaires to a fixed wiring installation. Available with PVC and LSF 0.75mm² / 1.0mm² flexible cable.
-
click to viewKlik Lighting Pre-Wired Plugs 6A
Klik 6A 3-pin pre-wired plugs used to connect luminaires to a Klik ceiling rose or marshalling box. All leads have prepared ends. Available with PVC and LSF 0.75mm² / 1.0mm² flexible cable.
-
click to viewKlik AX Pre-Wired Plug-In Ceiling Rose 6A
Klik AX 6A 4-pin pre-wired plug-in ceiling roses are used to connect luminaires to a fixed wiring installation. Available with PVC and LSF 0.75mm² / 1.0mm² flexible cable. Klik AX enables a second supply or special connection to be made.
-
click to viewKlik AX Pre-Wired Plugs 6A
Klik AX 6A 4-pin pre-wired red and white plugs aused to connect luminaires to a Klik ceiling rose or marshalling box. Available with PVC and LSF 0.75mm² / 1.0mm² flexible cable. Klik AX enables a second supply or special connection to be made.
-
click to viewKlik Passive Infra-Red Occupancy Sensor
The Klik range of pre-wired occupancy sensors with remote programming and control options provide a simple and cost effective means of controlling light levels. Perfect for use in office blocks, universities and all kinds of commercial applications.