Heatrae Sadia Handy 3 Instantaneous Handwash Water Heater 3.1kW 240V (95020113)
Handy 3 is a compact instantaneous hand wash unit (Order Code 95.020.113) is simple to operate with a single-turn rotary control dial, ‘Power On’ indicator and durable 200mm swivel spout. The unit now incorporates additional safety devices giving users further protection from scalding.
within 5-7 working days
Heatrae Sadia Handy 3 Description
Heatrae Sadia Handy 3 is a compact instantaneous hand wash water heater rated at 3.1kW and is suitable for connection to a convenient ring final circuit where more hot water is required. The model is retro-fit to previous Handy models.
Handy 3 has two levels of over-temperature protection and excessive pressure safeguards. This unit offers comprehensive safety protection against the dangers of both scalding and excessive pressure build-up within the unit. The two-level cut-out system is particularly noteworthy. The first cut-out activates at 52°C, providing an initial layer of protection. This cut-out resets when the water cools down to 42°C, ensuring a safe and controlled user experience. For extreme conditions, a second level of protection cuts out at 92°C and is not re-settable, offering enhanced safety.
Controls are made easy with a single-turn rotary control dial that manages on/off functions, temperature settings, and flow adjustments. The outer casing, crafted from white moulded ABS plastic, houses a copper-sheathed rod-type heating element and a water container made of durable glass-reinforced nylon.
The flow/temperature stabiliser ensures that a consistent outlet temperature is maintained even in conditions of variable water pressure. Additionally, a pressure relief device prevents pressure build-up during freezing or blockage scenarios.
The Heatrae Sadia Handy 3 water heater comes with a 2-year guarantee, providing users with confidence in its performance and durability. The unit made in the UK, BEAB and Kiwa approved to UK water supply regulations and CE marked.
Heatrae Sadia 95020113 Features
- Power rating (kW): 3.1
- MPN: 95020113
- Voltage Rating (V): 230
- Dimensions (mm): W151 D98 H369
- Colour: white
- Consistent, splash free spray pattern
- Flow/temperature stabilised for constant outlet temperature
- Two levels of over temperature protection
- Excessive pressure protection
- 15mm female 'Push Fit' connection to water supply
- Extended Spout (380mm) is available as an Accessory
- 2 year guarantee
- Outer casing: White moulded ABS plastic cover
- Heat unit: Copper sheathed rod-type element
- Water container: Glass reinforced nylon
- Ingress protection: IPX5
- Approvals: BEAB and Kiwa approved to UK water supply regulations. CE marked.
Fixing
Base assembly is secured to wall by two fixing screws, followed by electrical and plumbing connections. The spout and front cover are then attached. Two screws secure the front cover.
Plumbing
15mm female push fit at the base of the unit for bottom or rear (concealed) entry. Incoming feed pressure should be between 0.1Mpa (1 bar-14.5psi) and 0.7Mpa (7 bar-100psi).
Electrical
Cable entry from rear or bottom of unit.
Special requirements of the BS 7671 (IEE Wiring Regulations) should be observed when installed in bathrooms.
Units must be permanently connected to the electrical supply through a double-pole linked isolating switch.
Can be supplied from a ring final circuit via a fused spur with a double pole linked isolating switch with a 13A minimum breaking capacity.
Cable – 1.5–2.5mm².