Danlers MWCEFL White Round Recessed Single Channel 360° | 12m Microwave Presence Detector With Lux Level Sensing & 5sec - 30min Time Delay Function IP20 4A 240V DiaØ: 85mm | Recess Depth: 64mm
The Danlers MWCEFL is a white round 4A single channel flush mounting microwave presence detector that is designed for the automatic switching of lighting, heating and air conditioning loads. Ideal for flush mounting through suspended or plasterboard ceilings.
within 1-2 working days
Danlers MWCEFL Description
The Danlers MWCEFL is a white round 4A single channel flush mounting microwave presence detector that is designed for the automatic switching of lighting, heating and air conditioning loads. Ideal for flush mounting through suspended or plasterboard ceilings.
The sensor detects movement within its range of detection by emitting low power microwave signals and measuring the reflections as the signal reflects off moving objects such as people moving through a room. When movement is detected, the load switches on. If no more movement is detected within a certain time, the MWCEFL will switch the load off.
This time lag (hold time) can also be set via the rotary switch. Upon detecting movement, if the ambient light is dark enough, MWCEFL will turn the load on. The ambient threshold can also be set by setting the rotary dial to the appropriate pre-set.
MWCEFL has a snap fit cover allowing for easy adjustment of time lag and lux level functions. Its slim profile is visually unobtrusive making it suitable for corridors, offices, washrooms etc. in offices, factories, hospitals and schools.
Danlers MWCEFL Features
- Danlers MWCEFL white flush mounting single channel 360° | 12m microwave detector
- IP20 rated
- Flush mounting
- Installed through suspended or plasterboard ceilings
- Suitable for automatic switching of lighting, heating and air conditioning loads
- Ideal for retrofitting or new build
- Detection range: 12m at 6m high
- Detection Angle: 30° - 150°
- Adjustable time lag and sensitivity settings
- Adjustable photocell lux: 2 to 50 lux and inactive
- Switches up to 4 amps (1200W) of resistive load
- Switches up to 2 amps (500W) of most other lighting loads including LED
- Time lag range: 10 seconds to 40 minutes in 9 steps
- Maximum resistive load: Up to 1200W
- Maximum LED loads: Up to 400W
- Standards: BS EN 60669-2-1 and BS EN 55015
- Dimensions: Diameter Ø: 85mm | Recess Depth: 65mm