SWA CG/LNM-20LW-PACK (Pack of 50) White Nylon Quick Fitting Dome Top Cable Gland With Locknut IP68 20mm | Cable Dia: 10mm - 14mm
The SWA CG/LNM-20LW 20mm white polymide dome top cable gland grey with locknut is suitable for use with cable diameters between 10mm and 14mm. It's IP68 rating ensures resilient cable protection in outdoor and other harsh environments.
within 1-2 working days
SWA CG/LNM-20LW-PACK Description
The SWA CG/LNM-20LW white nylon quick fitting dome top cable gland with locknut is suitable for use with cable diameters between 10mm and 14mm. It's IP68 rating ensures resilient cable protection in outdoor and other harsh environments.
This high quality compression gland is made from nylon - polyamide 6 with a neoprene rubber seal/insert that provides a waterproof environmental seal to IP68.
Simple and easy to use, these glands provide excellent strain relief and cable protection for PVC or rubber circular profile cables.
Commonly used within construction and by electricians and electrical engineers to mount a cable into a pre-drilled hole, they deliver in areas where vibration could be a problem.
The CG/LNM-20LW is re-useable, although the cap when tightened is locked it can be un-screwed and re-tightened.
SWA CG/LNM-20LW-PACK Features
- Available in sizes from 12mm to 32mm
- Metric thread
- Grey, Black, White and Red coloured nylon cable glands available
- IP68 rating that provides protection against the ingress of dust and water
- Nylon polyamide 6 (body & nut) and rubber (seal) material
- Designed for a perfect grip and effortless spanner tight seal
- Supplied with a lock nut
- Easy to install, no need to dismantle the gland, just insert the cable and tighten
- Optimal strain relief and cable protection combined with a generous clamping range
- Built-in vibration protection system to eliminate loss of torque
Material: Polyamide 6 (halogen free)
Trade name: Ultramid B
Protection class: IP68 5 bar
Operating temp range: -30°C to +80°C
Intermittent temp: Up to +150°C intermittent
Seal: Neoprene
Properies of plastic cable glands: Gross density DIN 53457: 1.14g/cm³
Approvals:
Underwriters Laboratories (UL Approval) – Cert. no: E178501(N)
Canadian standards (CSA Approval) – Cert. no: 1454383
VDE Approval DIN EN 50262 (VDE 0619)
Chemical characteristics Resistant to:
Acids – high concentrate (conditionally resistant)
Acids – low concentrate
Fuel DIN gasoline/super
Fuel DIN diesel
Mineral oil
Vegetable oils and fats
Hot Deals : | Cable Accessories |