Trench MDT050FT Pre-Galvanised Medium Duty Cable Tray 90° Flat Tee Width: 50mm | Height: 25mm
The Trench MDT050FT is a 50mm wide pre-galvanised medium duty cable tray 90° flat tee that enables the creation of diverse and complex installation requirements needed to support electric power and communication cables.
within 1-2 working days
Trench MDT050FT Description
The Trench MDT050FT is a 50mm wide pre-galvanised medium duty cable tray 90° flat tee that enables the creation of diverse and complex installation requirements needed to support electric power and communication cables.
Designed to fit to the ends of MDT050TR 50mm pre-galvanised medium duty cable tray lengths. Suited for medium cable load applications & when covering over a large span.
Unlike conduit systems, which require pulling wires and cables through a pipe, cable tray systems make it easy to run new lines. The new cables are installed by laying them on a flat, open surface. This functionality makes Trench cable tray systems suitable for installations in retail, industrial and data centres where cables and wires need frequent replacement or re-routing.
Suitable for indoor applications, forms part of an economical, reliable, easy fit metal cable management solution.
Meets BS EN 61537: 2007 and BS EN 10346:2015 standards
Trench MDT050FT Features
- Trench MDT050FT medium duty cable tray 90° flat tee
- Material: pre-galvanised steel
- Width: 50mm
- Height: 25mm high return flange sides
- Hole pattern designed to provide maximum flexibility for positioning cable ties without compromising strength
- Fit to the ends of MDT050TR 50mm pre-galvanised medium duty cable tray lengths
- Suitable for internal applications
- Full range of lengths, bends, risers and tees are available
- Standards: BS EN 61537: 2007 and BS EN 10346:2015
- Tested and classified as Type 2