Trench MDT075IN Pre-Galvanised Medium Duty Cable Tray 90° Internal Riser Width: 75mm | Height: 25mm

Trench MDT075IN Description

The Trench MDT075IN is a 75mm wide pre-galvanised medium duty cable tray 90° internal riser that enables the creation of diverse and complex installation requirements needed to support electric power and communication cables.

Designed to fit to the ends of MDT075TR 75mm pre-galvanised medium duty cable tray lengths. Suited for medium cable load applications & when covering over a large span.

Unlike conduit systems, which require pulling wires and cables through a pipe, cable tray systems make it easy to run new lines. The new cables are installed by laying them on a flat, open surface. This functionality makes Trench cable tray systems suitable for installations in retail, industrial and data centres where cables and wires need frequent replacement or re-routing.

Suitable for indoor applications, forms part of an economical, reliable, easy fit metal cable management solution.

Meets BS EN 61537: 2007 and BS EN 10346:2015 standards

Trench MDT075IN Features

• Trench MDT075IN medium duty cable tray 90° internal riser
• Material: pre-galvanised steel
• Width: 75mm
• Height: 25mm high return flange sides
• Hole pattern designed to provide maximum flexibility for positioning cable ties without compromising strength
• Fit to the ends of MDT075TR 75mm pre-galvanised medium duty cable tray lengths
• Suitable for internal applications
• Full range of lengths, bends, risers and tees are available
• Standards: BS EN 61537: 2007 and BS EN 10346:2015
• Tested and classified as Type 2