Heatrae Sadia 95.200.253 Supreme 165 White Instant Beverage Boiling Water Heater 5Ltr 2.5kW 240V
Heatrae Sadia's Supreme 165 (Order Code: 95.200.253) 5 litre capacity instantaneous beverage water heater is supplied in a high quality white thermoplastic finish with new modern design. Permanently plumbed, wall-mounted it delivers boiling water for drinks and snacks up to 30 mugs at one time.
Order code: 95200253
Manufacturer: Heatrae Sadia
GTIN: 5012496002531
Notify me by email when product is available
Normally despatched
within 5-7 working days
within 5-7 working days
Heatrae Sadia 95200253 Description
The Supreme 165 is a premium quality, permanently plumbed and electrically powered beverage boiling water heater which includes Intelliboil™ Plus technology. Intelliboil Plus brings the water to boil on demand and if there is no use for an hour it reduces the temperature by 10°C, to provide energy efficient management of the boiling cycle.
- Intelliboil™ technology for the efficient management of the boiling cycle.
- Immediate draw off 30 cups (165 cups per hour based on 167ml cup)
- Easy installation with auto-commissioning.
- Integral electronic water conditioner makes Supreme less prone to scale.
- 'Power on' indicator.
- 'Temperature ready' indicator confirms when ready to use
- Engineering grade thermoplastic water container for longer life expectancy
- Detachable steam condensing chamber for easy service access.
- Modular construction ensures easy maintenance.
- Retains same footprint, service connections and wall fixings as previous models.
- Easy to clean white high impact thermoplastic outer casing.
- Two year on-site parts and labour guarantee.
- BEAB approved.
- Kiwa approved to UK Water Supply Regulations.
- Made in the UK.
Heatrae Sadia 95200253 Features
Capacity - 15 cups at one time (10 mugs)
Rating - 2.5kW @ 240V. (2.3kW @ 230V) to recover 165 cups* per hour.
Outer casing - White high impact thermoplastic.
Thermal insulation - CFC/HCFC free (ODP zero) pre-moulded polystyrene and thermoplastic blend.
Water container
- Moulded Polyphenylene Sulphide.
- Removable steam condensation chamber for maintenance access.
Heat unit - Low watt density Superloy element for long life.
Thermostat
- Electronic to control water temperature up to boiling point.
- Electromagnetic wave generator to reduce limescale formation.
Safety features
- All models are low pressure vented.
- Dry start protection by self resetting bi-metal thermal cut-out.
- Boil dry by protection by manually resettable disc-type bi-metal cut-out.
Approvals
- BEAB and Kiwa approved to UK Water Supply Regulations.
- Manufactured in the UK in a BS EN ISO 9001:2008 registered factory.
Fixing
Supreme units have a fixing template and hook-on brackets for wall-mounting, ideally over a draining board or drip-tray. Clearance should be allowed all around the unit for maintenance (refer to instructions).
Retrofit
Supreme retains the same footprint, service connections and wall fixings as previous Supreme models.
Plumbing
Cold water feed should be taken directly from the mains – min pressure 0.5 bar (7psi) max pressure 10 bar (145psi). Bottom or rear entry is possible using 15mm push-fit connections.
Electrical
Supply (bottom or rear entry) 2.5kW units can be taken from a suitable ring final circuit via a fused spur but must be via a double-pole linked isolating switch with a minimum break capacity of 10.5A.
All electrical work must comply with the latest IEE wiring regulations.