Heatrae Sadia Hotflo 15 Litre 2.2kW Unvented Water Heater (95050149)
Heatrae Sadia Hotflo 15 is a 15 litre unvented water heater which is perfect for supplying environments such as washrooms with three hand basins or sinks. Designed for small to medium commercial businesses, Hotflo is suitable when there is no need for a cold water cistern, which provides flexibility of installation and works with either standard or mixer taps. A temperature and pressure relief valve or thermostatic blending valves (if required), must be ordered separately.
within 5-7 working days
Heatrae Sadia Hotflo 15 Description
Heatrae Sadia Hotflo 15 DescriptionHeatrae Sadia Hotflo 15 ltr water heaters can be used with standard or mixer taps and fed from the mains water supply provides high hot water flow rates. With the best possible performance, long-term reliability and corrosion-resistance in mind, this water heater has a high-grade copper inner container. Using copper for this key component also means no requirement for a sacrificial anode - avoiding the need for the hassle and expense of regular inspections and replacement. In addition, copper is better than lower grade materials at withstanding shock and vibration during delivery,installation and maintenance.
With a 15-litre capacity and 2.2kW power rating, the Heatrae Sadia 95050149 is perfect for catering to up to two basins, offering a seamless and consistent supply of hot water for your daily needs. It is suitable for use with any standard tap or mixer.
The replaceable inner container, designed for a working pressure of 6 bar and type-tested to an impressive 20 bar, ensures durability and longevity. The embedded rod-type element, sheathed in corrosion-resistant alloy, further enhances the unit's resilience. Customise your hot water preferences with the externally adjustable thermostat, ranging from 10°C to 70°C. Environmental consciousness is woven into the Heatrae Sadia Hotflo 15 ltr design with CFC/HCFC-free (ODP zero) flame-retardant expanded polystyrene insulation, ensuring energy efficiency. Fitted with 1-metre 3-core cable, pressure relief valve, and detailed installation instructions for a hassle-free setup.
The Heatrae Sadia Hotflo 15 water heater is Kiwa approved to UK Water Supply Regulations, CE marked, and manufactured in the UK in a BS EN ISO 9001:2000 registered factory.
Heatrae Sadia 95050149 Features
- Capacity (L): 15
- Power rating (kW): 2.2
- MPN: 95050149
- Voltage Rating (V): 230
- Dimensions (mm): W267 D252 H656
- Weight (KG): 8.4
- Colour: white
- Replaceable copper inner container with integral heating element.
- Two year guarantee with on-site service support.
- Externally adjustable thermostat from 10°C to 70°C.
- CFC/HCFC free (ODP zero) flame-retardant expanded polystyrene.
- Suitable for use with any standard tap or mixer.
- Fitted with 1 metre of 3-core cable.
- Pressure relief valve supplied with all models.
- IPX4 rated.
- Kiwa approved to UK Water Supply Regulations. CE marked.
Mechanical
Must be mounted in the vertical position with inlet / outlet at the top. Floor or wall-mounted (three screws / keyhole slots).
Plumbing
15mm copper tail ends. Minimum water pressure 0.8 bar (12 psi). For pressures above 4.1 bar (60 psi), packs U1 and U5 must be used. NOTE: The pressure relief valve supplied must always be fitted. See accessory selection guide on page 4. Temperature and pressure relief valve Optional Pack U6
Safety valve discharge
The pressure relief (expansion) valve or temperature & pressure relief valve (if used) must be plumbed to discharge in a safe visible location.
Optional thermostatic blending valve
Accessory Pack U3 and Pack U7 allows water to be stored at high temperature and blended with cold to a preset outlet temperature.
Electrical
The unit must be permanently connected to the electrical supply through a double-pole linked switch with minimum breaking capacity of 13 amps.
Must conform to current IEE wiring regulations.