Zip VP153 Varipoint2 White 15 Litre 2.2kW Unvented Oversink Water Heater For Single Or Multiple Outlets
The Zip VP153 Varipoint II unvented water heater can provide hot water, at mains pressure, for one or more outlets and can be used with conventional taps. The outer case of is made of white high impact, corrosion resistant, white plastic complete with a heavy gauge copper storage tank tested to 16 bar. A factory fitted pressure and temperature relief valve and external temperature control with frost protection setting simply keep adding to the Varipoint II benefits.
Order code: VP153
Manufacturer: Zip Water Heaters
GTIN: 5036764322022
Notify me by email when product is available
Normally despatched
within 1-2 working days
within 1-2 working days
Zip Water Heaters VP153 Description
For the lowest lifetime cost the Zip VP153 Varipoint 2 15L is the ultimate "fit and forget" water heater. This 15 litre oversink model has external temperature controls and frost protection settings.
This unit delivers hot water at mains pressure, catering to one or more outlets with ease, and seamlessly pairs with conventional taps or mixers for a versatile solution.
The Zip VP153 is equipped with a factory-fitted pressure and temperature relief valve, ensuring optimal safety and performance. Its heavy-gauge copper storage tank, rigorously tested to 16 bar, guarantees durability and reliability. The external temperature control, complemented by a frost protection setting, adds an extra layer of convenience.
With a 2.2 kW heating element and an adjustable thermostat with positive location at each setting, the Zip Varipoint 2 15L VP153 offers precise control over your water temperature. Has a cutout set at 95°C with a manual reset facility.
Zip Varipoint 2 15L VP153 Features
- Capacity (L): 15
- Power rating (kW): 2.2
- Voltage Rating (V): 230
- Dimensions (mm): W300 D285 H452
- Weight (KG): 6.5
- Colour: white
- Inlet pipe 1/2"bsp
- Installation: Oversink
- Heating element: Embedded rod type
- Thermostat: Capillary type adjustable up to 80ºC
- Water tank: Heavy gauge copper, pressure tested at 16 bar with a working pressure of 6 bar.
- Case: High impact resistant white plastic.
- Insulation: Pressure injected polyurethane foam.
- Approvals: WRAS Approved and CE Endorsed.
- Warranty: Five year on site parts and labour warranty on inner container, two years on controls
Location
• Separate models are supplied for over-basin and under-basin installation.
• All models can supply one outlet or multiple outlets, no special taps required.
• Under-basin is floor standing, connections uppermost.
• Over-basin is wall hung, on bracket provided.
Plumbing
• Water connections 15mm BSP.
• Expansion relief valve (supplied) to be fitted in cold water supply.
• Should be installed only by a suitably experienced installer of unvented electric storage water heaters.
Electrical
• To be wired to a double pole fused spur, minimum break rating of 13 amp.
• Installation must comply with current IEE regulations.
• Supplied with 1 metre of pre-wired cable.
Caution
• Variable temperature water heaters should be set only in strict compliance with regulations governing the temperature of stored and dispensed hot water.