Danlers EXTLSW16A Grey Polycarbonate Exterior Electronic Adjustable 3-Wire Time Lag Switch With Illuminated Push Button, 2-20mins Time Lag & IP66 Moulded Enclosure 16A 240V Height: 112mm | Width: 120mm | Depth: 60mm

Danlers EXTLSW16A Description

The Danlers EXTLSW16A is a grey polycarbonate 3 wire external IP66 16A time lag switch and moulded enclosure that is ideal for energy saving control of exterior heaters and exterior lighting. Is also suitable for damp areas indoors.

Electronic time lag switches are designed to switch lights, or other loads, on for a limited time only, and to switch off automatically after a time lag has elapsed. The time lag settings are adjustable from 2 to 20 minutes and can be adjusted by a spindle on the bottom edge of the product.

Maximum load Up to 16 amps (4000W) of quartz heaters, 12A (3000W) resistive, transformer or fluorescent lighting loads, 2 amps (500W) of CFL, LED Drivers and LED lamps and fittings, 1 amp (250W) of fans.

The illuminated touch area offers easy location in the dark. Enclosed in a tough, hard wearing, IP66 rated polycarbonate enclosure.

Danlers EXTLSW16A Features

• Danlers EXTLSW16A grey external 3 wire adjustable time lag switch
• Ideal for energy saving control of exterior heaters and exterior lighting
• Also suitable for damp areas indoors
• Tough, hard wearing
• 3 wire version, a neutral wire is needed
• The time lag is adjustable from 2-20 minutes
• Pressing the touch sensitive area brings the connected load on
• The load is then switched off automatically after the time lag has elapsed
• Illuminated touch area for easy location in the dark
• Tough, hard wearing, IP66 rated polycarbonate moulding
• Vandal resistant
• Maximum load 16A (4000W) of quartz heaters
• 12A (3000W) of fluorescent
• 2A (500W) of most metal halide lamps
• Dimensions: Height: 112mm | Width: 120mm | Depth: 60mm