Lewden PRO-PM10 All Metal 10+1 Way Pre-Populated Flexible Twin RCD Consumer Unit With 100A Switch Isolator, 2x80A 30mA Type A RCDs & 2x6A + 1x16A + 3x32A MCBs Width: 353mm | Height: 266mm | Depth: 106mm

Lewden PRO-PM10 Description

The Lewden Pro-Series PRO-PM10 is a white all metal 17 way (10+1 useable ways) pre-populated twin RCD flexible split load consumer unit offering an easy to install consumer unit, meeting the requirements of the latest 18th Edition Wiring Regulations.

Supplied with all incomer devices (1 x 100A main switch isolator and 2 x 80A 30mA Type A RCDs), 6 Miniature Circuit Breakers MCBs (2 x 6A, 1 x 16A, 3 x 32A).

Offers 10 fully configurable ways plus 1 extra module included for the optional installation of surge protection. The unit enables on-site configuration to high integrity option.

The Pro series consumer unit has a curved, non-intrusive design that fits seamlessly into its surroundings. The all metal enclosure is painted in low smoke and fume paint in compliance with the latest 18th edition wiring regulations.

Designed with the installer in mind, it is easy to install with generous cable room with neutral and earth bars mounted on the top of the enclosure. Offers a choice of knockouts for mini trunking & conduit.

Tested in accordance to BS EN 61439-3. it includes comprehensive user instructions and high quality sub circuit identification labels.

Lewden PRO-PM10 Features

• Lewden PRO-PM10 pre-populated flexible split load dual RCD consumer unit
• 10 + 1 useable ways, 17 module enclosure
• One additional modular way for the provision of a surge protection module
• White all curved fully metal enclosure
• Rating: 230V - 240V
• 1 x 100 Amp DP main isolator switch controls the entire board
• 2 x 80A 30mA Type A RCD protection
• Supplied with 6 MCBs (2x6A, 1x16A, 3x32A)
• Stylish, non-obtrusive design
• Low smoke and fume paint
• IP Rating: IP2XC
• Highly flexible in configuration permitting any combination of RCD protected ways
• Metal DIN rail assembly
• Flexible Busbar allowing the user to choose how they configure the split-load
• Optional on-site configuration as high integrity
• Cable entry knockouts for mini trunking & conduit
• Generous cable room with neutral and earth bars mounted on the top of the enclosure
• Circuit identification labels providing clear understanding of outgoing ways
• Busbar shroud
• 18th edition wiring regulations
• Standards: BS EN 61439-3, BS7671:2018
• Dimensions: Height: 266mm | Width: 353mm | Depth: 106mm