Dilog DL6799 CombiVolt 5 Digital TrueRMS Open Jaw Voltage, Continuity & Current Tester With GS38 Shrouded Probe Tips, Flashlight & Carry Case 750V AC 1000V DC | 200A AC/DC

Dilog DL6799 Description

The Dilog CombiVolt 5 DL6799 is the latest five-in-one voltage, continuity and current tester designed with a rugged, ergonomically formed housing for perfect handling under site conditions.

Performs a range of different measurements. It has a fixed jaw clamp that can measure AC/DC current from 0 to 200A whilst the two pole voltage test function can detect AC voltages from 1mV to 750V and DC voltages from 1mV to 1000V. The tester is also capable of performing non-contact and single-pole phase testing in addition to continuity testing, phase rotation testing, capacitance measurement up to 60mF and resistance measurement up to 60MΩ.

The function is selected using the clearly labelled dial whilst other aspects are controlled though push buttons. Readings are shown on the tester’s backlit digital display and there is a relative mode as well as data hold which freezes a reading on screen.

A bright LED torch is incorporated into the clamp so the user can illuminate the measurement area whenever necessary. The tester has GS38 shrouded probe tips.

Fully compliant to BS EN 61010-1, 61010-2-032, CAT II 1000V & CAT III 600V.

Dilog DL6799 Features

• Dilog DL6799 CombiVolt 5 Digital TrueRMS Voltage, Continuity & Current Tester 
• Rugged 5-in-1 tester optimised for electricians and electrical engineers
• Open jaw design
• Durable, ergonomically formed casing optimised for ease of handling
• True-RMS
• Data Hold Function
• Non-contact voltage detection
• Backlit LCD Display
• 750V TRMS AC / 1000V DC voltage measurement
• Single Pole Voltage Detection
• Non-Contact Voltage Detector
• Single pole phase indication
• 200A TRMS AC /DC Current measurement
• 1000V Voltage
• 100,000µA Current Resolution
• 60mΩ Resistance with Audible Continuity
• Capacitance up to 60mF
• Includes test leads
• GS38 shrouded probe tips
• Capacitance - 60.00nF - 60.00mF
• Diode - 6.000V.
• Power supply - 2 x 1.5 V (AA) PBLR6 .batteries (batteries Included).
• Bright LED Flashlight.
• Carry Case.
• Standards: BS EN 61010-1, 61010-2-032, CAT II 1000V & CAT III 600V
• Dimensions: Length: 210mm | Width: 53mm | Depth: 35mm