Armeg EBS.TCINST.SET Tri-Cut Complete Box Sinking & Channelling Set

Armeg EBS.TCINST.SET Description

The Armeg EBS.TCINST.SET is a complete box sinking and channelling set that enables all professional electricians to cut single and double socket box holes in the hardest of brickwork in under 2 minutes! Offering huge time savings, the hammer and bolster chisel can now be retired.

The Tri-Cut features a unique three wing system which leads to a 20% reduction in vibration and a much smoother drilling action. Containing 50% more carbide than its predecessor with nine precision angled tungsten carbide tips, the Tri-Cut now has an even longer tool life than ever before and now exhibits maximum performance in the hardest materials. It can be used in common brick, block, hard brick, wet or green masonry, and uncured concrete.

Ideal for occasions where time saving is essential, neat & professional finishes are required, a flat backed hole is desired and numerous back box holes need to be drilled. Simply:-

• Drill a 6mm pilot hole in the wall.
• Remove the majority of the material using the Tri-cut round cutter to the required depth.
• Square off the hole by using either the square cutter in soft materials e.g. medium density concrete block and soft brick, or the 80mm chisel in hard materials e.g. engineering brick.
• Use the 30mm channelling chisel to run accurate channels in seconds!

This kit also contains an EBS hard material chisel and channelling chisel to complete the job of cutting out channels to that cables can be brought to the box holes made by the cutters.

Contents

• 1 x Tri-Cut round cutter with dust collection
• 1 x EBS single socket box cutter
• 1 x EBS double socket box cutter
• 1 x EBS 80mm hard material chisel
• 1 x 30mm channelling chisel
• 5 x 6mm SDS plus hammer drill bits
• 1 x double hole spacing template.
• Supplied with durable carry case and 1 year guarantee.

Armeg EBS.TCINST.SET Features

• Armeg EBS.TCINST.SET Tri-Cut complete electrical box sinker set
• Drill a square hole for a back box in under 2 minutes
• Three precision cast high alloy wings result in a smoother drilling action and less kick back
• Unique tri-cut round cutter results in more even drilling and 20% reduced vibration
• Contains 50% more carbide than its predecessor with nine precision angled tungsten carbide tips
• Tri-Cut design is the ultimate design for drilling hard materials.
• Tri-Cut now has an even longer tool life than ever before
• Used in common brick, block, hard brick, wet/green masonry and uncured concrete
• Ideal were numerous back box holes need to be drilled
• Use the EBS hard material chisel and channelling chisel to run accurate channels in seconds
• Ultimate in user comfort and is an absolute essential for all professional electricians