Armeg EBS.TC.SET Tri-Cut Single Box Sinking Set

Armeg EBS.TC.SET Description

The EBS.TC.SET electrical box sinker set features an all new Tri-Cut round cutter allowing the user to drill a square hole for back boxes in under 2 minutes! Production of switch and socket boxes with a hammer and chisel can now be a thing of the past

The Tri-Cut features a unique three wing system which leads to a 20% reduction in vibration and a much smoother drilling action. Containing 50% more carbide than its predecessor with nine precision angled tungsten carbide tips, the Tri-Cut now has an even longer tool life than ever before and now exhibits maximum performance in the hardest materials. It can be used in common brick, block, hard brick, wet or green masonry, and uncured concrete.

Ideal for occasions where time saving is essential, neat & professional finishes are required, a flat backed hole is desired and numerous back box holes need to be drilled. Simply:-

• Drill a 6mm pilot hole in the wall.
• Remove the majority of the material using the Tri-cut round cutter to the required depth.
• Square off the hole by using either the square cutter in soft materials e.g. medium density concrete block and soft brick, or the 80mm chisel in hard materials e.g. engineering brick.

The EBS Tri-Cut provides the ultimate in user comfort and is an absolute essential for all professional electricians delivering huge time savings. 

Contents:

• 6mm x160mm SDS+ pilot drill bit
• New Tri-Cut cutter with guide adapter
• Single square cutter with guide adaptor
• Oval Drilling Shroud
• Bolster for use with harder materials

Armeg EBS.TC.SET Features

• Armeg EBS.TC.SET Tri-Cut electrical box sinker set
• Drill a square hole for a back box in under 2 minutes
• Three precision cast high alloy wings result in a smoother drilling action and less kick back
• Unique tri-cut round cutter results in more even drilling and 20% reduced vibration
• Contains 50% more carbide than its predecessor with nine precision angled tungsten carbide tips
• Tri-Cut design is the ultimate design for drilling hard materials.
• Tri-Cut now has an even longer tool life than ever before
• Used in common brick, block, hard brick, wet/green masonry and uncured concrete
• Ideal were numerous back box holes need to be drilled
• Ultimate in user comfort and is an absolute essential for all professional electricians