Armeg WH25.0X235 Wood Auger Drill Bit With Hexagon Shank DiaØ: 25mm | Overall Length: 235mm

Armeg WH25.0X235 Description

The Armeg WH25.0X235 is a diaØ: 25mm wood auger drill bit with hexagon shank that incorporates ground and sharpened combination cutting edges to produce fast, clean and accurate holes.

The optimum scroll size allows perfect progression and minimised damaging breakout. Screw tip pulls the auger through the wood for added ease of use and minimal user effort. Precision ground back tapered flute prevents the drill from jamming in holes and provides easy tool removal. Hardened and sharpened cutting edges enable the number of holes per charge achieved in cordless machines to be increased. The hex shank for use in rotary machines with 3 jaw chuck holding system.

The WH25.0X235 hex shank wood auger drill bit is dual-purpose for use in both electric power drills and hand braces. Ideal for deep 20mm hole drilling in timber e.g. for cables or pipe passage through roof or floor joists.

Suitable for use in hardwoods, softwoods, veneered chipboard, plywood and chipboard.

Armeg WH25.0X235 Features

• Armeg WH25.0X235 is a diaØ: 25mm wood auger drill bit with hexagon shank
• Use for quick precision cutting with all types of wood.
• Incorporate ground and sharpened combination cutting edges that produce fast, clean and accurate holes
• Precision ground back tapered flute prevents drill from jamming in holes and provides easy tool removal
• Screw tip pulls the auger through the wood for added ease of use and minimal user effort
• Optimum scroll size allows perfect progression and minimised damaging breakout
• The ‘In Flute’ is steam tempered to provide a smooth finish which allows rapid removal of wood chips and faster drilling
• Thin body core with deep flutes allows greater removal of wood chips
• Hardened and sharpened cutting edges enable the number of holes per charge achieved in cordless machines to be increased
• It has a threaded tip for moderate self-feed when using a power drill, but still sufficient self-feed when using a hand brace
• Hex shank for use in rotary machines with 3 jaw chuck holding system
• Can be used in: hardwoods, softwoods, veneered chipboard, plywood and chipboard
• Dimensions: DiaØ: 25mm | Overall Length: 235mm