Vent-Axia 17104010 ACM100 White Polymer 3 Speed Mixed Flow In-Line Fan For Remote Switching IP44 240V Length: 298mm | Width: 168mm | Spigot DiaØ: 100mm

Vent-Axia 17104010 Description

The range consists of six sizes: 100, 125, 150, 200, 250 and 315mm with air volumes from 220 to 1860m³/h at free air, suitable against working pressures up to 400 Pa. ACM100T and ACM150T have built-in adjustable timers. All other models, with the exception of the ACM315 can be used with a timespan remote overrun timer, adjustable 3-25 minutes to comply with Building Regulations for internal rooms.

Compact mixed flow blade design with guide vanes provides optimum pressure characteristics. All sizes feature a removable motor body and impeller assembly for easy cleaning without removing ductwork.

Features & Benefits

• Available in 6 Sizes
• 100 and 150mm timer versions
• Single direction, two speed selectable motor
• Easily accessible terminal box with 20mm entry
• Supplied completely assembled, ready for on-site installation
• For the best performance from your fan use a Vent-Axia electronic controller
• Designed to meet IP44

Motor

All motors are fitted with Standard Thermal Overload Protection. (S.T.O.P.). Motors are speed controllable on their high speed setting. Designed for ambient temperatures up to +50°C.

Size 100 and 125 with shaded pole motors. Size 150, 200, 250 and 315 with capacitor start and run motors. All sizes are Class I appliances. Supply voltage 220-240V/1/50Hz.

Typical Specification

The fan should be of the mixed flow design specifically for use with rigid and flexible ducting with energy efficiency and low sound levels in mind. The fan shall be fitted within the ducted system and isolated from the building structure by means of Anti- Vibration mountings.

The fans should be dimensionally compact saving weight and installation costs. The casing should be manufactured from galvanised sheet steel and manufacture is controlled to BS EN ISO 9001.

The fan should be fully speed controllable by using a variable speed controller.

The fan should be controlled by humidity, air quality or PIR sensor.

The fan motor should be removable by means of 2 Clip Bands for ease of maintenance.

Motors should have ball bearings greased for life to allow the fan to be installed at any angle and should have Class B insulation to allow the fan to work satisfactorily in ambient air temperatures from -30°C to +50°C and should be fitted with Standard Thermal Overload Protection (S.T.O.P.).

FAQs Answered:

• All models have two speed capability
• 100mm and 150mm models available with integral timer and single speed
• Suitable for installation at any angle
• Motor body is simply removed for cleaning
• Speed controllable