Vent-Axia 251210 VA100LT White Unshuttered Axial Extractor Fan With Adjustable Timer & Neon IPX4 240V Height: 146mm | Width: 146mm | Spigot DiaØ : 100mm

Vent-Axia 251210 Description

Features & Benefits

• Provides the necessary 15 l/s (54m³/h) to comply with Building Regulation (Document F) requirements for average domestic bathrooms and WC’s
• Panel, Window or Wall mounting
• Model options with shutter, timer and auto humidity control
• Available with instant electric shutter
• Sensors and auto mode controllers save energy by switching the ventilation units on only when needed and when the room is occupied.

Typical Specification

Supply and install a VA100 mains axial fan suitable for mounting in panels, walls or windows, with thermally operated backdraught shutter (X, XT, XH and XHT models only), removable grille and fan running light.

The fan performance should meet the Building Regulation (Document F) requirements of 15 litres a second for bathrooms and 6 l/s for toilets, (15 minute timer overrun model for internal WC’s).

The fan should have a ball bearing motor for installation at any angle. The motor should be insulated to Class B.

The fan should be BEAB approved.

Timer

VA100 models are fitted with an electronic timer which provides the necessary 15 minute overrun time to comply with Building Regulation (Document F) requirements for internal WC ventilation. Adjustable from 3-20 minutes.

To meet IEE Regulations, timer models should be isolated using a 3 pole isolator.

FAQ's Answered

• Can be installed at any angle
• If ceiling mounted a maximum of 3m rigid ducting should be used with a condensation trap
• The maximum length of 1.5mm2 cable between transformer and fan is 8 metres
• Integral humidistat and timer versions available
• Designed for window, wall or ceiling mounting