D-Line SAFE-D30 Passivated Coated Fire Rated Cable Clips For Ceiling Voids & PVC Trunking - Priced Individually 

D-Line SAFE-D30 Description

The D-Line SAFE-D30 is a passivated coated steel 18th edition fire-rated U-clip for supporting cables when installed direct-to-surface or in non-metallic trunking systems. Fully certified to satisfy legislative requirements to secure all surface cables in escape routes for all non-domestic installations.

The 20mm wide side tabs make this clip suitable for MMT2 trunking (25x16mm) but it can be used as a bare cable clip, fixed with a fireproof screw to a wall through a 5.7mm diameter hole. Ideal for 2x 2.5mm Twin & Earth, 2x 1.5mm 2-core FP cables

After securing the Safe-D Clips, ideally at 300mm intervals for horizontal installations, or 400mm for vertical, installers simply fold over the thumb-friendly tabs to hold the cables. The combination of the pliable gauge steel & rounded corner features makes U-Clips quick & easy to install.

Prevent cables dropping on escape routes allowing time to evacuate densely populated buildings. Fully tested as capable of supporting cables in temperatures of 970°C for 2 hours.

Fully safety tested and certified to & BS7671 & BS5839 part 1 compliant

D-Line SAFE-D30 Features

• D-Line SAFE-D30 18th edition fire-rated U-clip
• Priced individually for total convenience - only order what you need
• Steel construction
• Non corrosive passivated coating
• Fully tested as capable of supporting cables in temperatures of 970°C for 2 Hours 
• 18th Edition Compliant - prevents cables dropping on escape routes 
• Suitable for 30 x 15mm mini trunking or 25 x 16mm MMT2 Mini Trunking 25mm wide
• Can be retrofitted in existing PVC trunking
• Ideal for Ceiling Voids
• 5.7mm diameter pre-drilled hole in base
• Suitable for 2 x 2.5mm twin & earth, 2 x 1.5mm 2 core FP cables etc
• Smooth rounded edges and folding tabs that secure cables
• Thumb friendly 
• Melting Point in Excess of 1200°C
• For horizontal cable installations 300mm spacings are recommended
• For vertical cable installations 400mm spacings are recommended
• Compliant with BS7671 and BS5839-1 requirements
• Dimensions: Length: 20mm | Width: 23mm