Zip DCXNext InLine White Electronic 18/21/24/27kW 3 Phase Instantaneous Water Heater For Single Or Multiple Outlets

Zip DCXNext Inline Description

The Zip range of InLine instantaneous water heaters are suitable for washroom and bathroom requirements in a variety of settings. It features innovative bare wire heating technology to heat the water, with zero standing heat loss and quick heat up time of less than two seconds, Zip Inline is the most energy efficient way to directly heat water, electrically. Change temperature quickly at the touch of a button on the front case for 35°C, 38°C, 42°C, 48°C and 55°C

Easy to install, the Zip InLine simply need to be connect to standard closed outlet taps without the need for unvented water controls. The system must be installed in a frost-free environment. It should be positioned as close as possible to the outlet to minimise heat loss (recommended maximum 2 metres).

Zip DCXNext Inline Features

• Provides a continuous supply of instant hot water at exactly the temperature selected
• Button touch controls for ease of use
• Compact design allows the InLine to fit neatly in any location
• Power rating can be selected at time of installation

Heating System
Bare wire
Minimum Water Pressure
2 bar
Temperature Range
35°C-55°C

ErP Rating: A
Maximum inlet temperature: 30°
Max flow rate litres per min: 8
Power rating kW: 18, 21 , 24 , 27kW (Three Phase)
W x D x H (mm): 239 x 96 x 468