Heatrae Sadia 95.050.146 Multipoint White Unvented Water Heater With Temperature + Pressure Relief Valve & Externally Adjustable Thermostat 15Ltrs 4.5kW 240V
Heatrae Sadia Multipoint 15 litre 4.5kW version is a market-leading small unvented water heater which is ideal for any situation where a single heater is required to service the needs of multiple outlets. Supplied with a factory-fitted temperature and pressure relief valve and externally adjustable thermostat it is quick and easy to install.
Order code: 95050146
Manufacturer: Heatrae Sadia
GTIN:
Notify me by email when product is available
We can notify you
when we have stock
when we have stock
Heatrae Sadia 95050146 Description
The marketing leading range of small unvented water heaters. The Multipoint 95.050.146 is quick and easy to install and is supplied with a factory-fitted temperature and pressure relief valve.
- Replaceable long-life allow sheathed element
- 15 litre capacity
- 4.5kW ratings
- Externally adjustable thermostat from 10°C to 70°C
- No anode to check or replace
- IPX4 rated
- KIWA approved
- Five year inner container warranty
Heatrae Sadia 95050146 Features
Capacities : 10 and 15 litre.
Rating : 3.0kW, 4.5kW @ 240V. (2.8kW, 4.1kW @ 230V).
Outer Casing : White plastic top moulding with corrosion proof steel base and centre section, finished in white stove-enamel.
Insulation : CFC/HCFC free (ODP zero) flame-retardant expanded polystyrene.
Water Container : Replaceable heavy gauge copper inner container, designed for 6 bar (87psi) working pressure and type tested to 20 bar (290 psi).
Heat Unit : Replaceable, alloy-sheathed rod-type element.
Thermostat : Rod-type externally adjustable from 10°C to 70°C, lockable in hot or mid-range position.
Safety : Factory-fitted temperature and pressure relief valve opens at 7 bar (100 psi) or 90°C. Resettable over-temperature cut-out.
Approvals : BEAB and kiwa approved to UK water supply regulations. Manufactured in the UK in a BS EN ISO 9001:2000 registered factory.
Guarantee : 5 year copper inner container guarantee with on-site service support from date of purchase.
Fixing:
Must be mounted in the vertical position with inlet/outlet at the top. Floor or wall mounted (three screws/ keyhole slots).
Plumbing:
15mm copper tail ends. Minimum water pressure 0.8 bar (12 psi). For pressures above 4.1 bar (60 psi), Packs U1 and U2 must be used. NB: The temperature and pressure relief valve supplied must always be fitted.
Safety Valve Discharge
The temperature & pressure relief valve must be plumbed to discharge in a safe visible location.
Optional Thermostatic Blending Valve
Accessory Packs U3 and Pack U7 allow water to be stored at high temperature and blended with cold to a preset outlet temperature.
Electrical:
The unit must be permanently connected to the electrical supply through a double-pole linked switch with minimum breaking capacity of 13 Amps. Must conform to current IEE wiring regulations.