Aico EI450 RadioLINK Wireless Enabled 9V Fire & Carbon Monoxide Alarm Controller

Aico EI450 Description

The Ei450 RadioLINK™ Alarm Controller is used to control all the Alarms in a system from one convenient place. An alarm controller is highly recommended if Smoke, Heat and Carbon Monoxide Alarms are on the same system, as it is essential that alarm that has sounded can be identified. The Ei450 contains LED indicator icons which clearly display which danger has activated the alarm. From there the danger can be activated and appropriate remedial action taken.

The Ei450 is powered for life by a tamperproof, sealed lithium battery. It is completely wireless and can be wall mounted or freestanding, giving more freedom on its location. It contains RadioLINK™ wireless technology enabling communication with up to 12 other RadioLINK™, RadioLINK+™ and SmartLINK™ alarms and devices. An interconnected system will enhance early detection and warning of danger.

In standby, the alarm system can be easily tested by just pressing the central button. This will test and sound all the interconnected alarms for a short period of time.

When the system is activated the triggering alarm can be identified (located) by pressing the central button. The Ei450 will identify the triggering alarm and indicate whether it has been triggered by a smoke, heat or carbon monoxide alarm by a flashing indicator icon. Once identified it may be silenced by pressing the central button again.

The system diagnostics mode allows an extended two minute 'Long Test' period to be selected. It also allows a previously triggered alarm to be identified, this is known as the 'Check Alarm Memory Test'.

Aico EI450 Features

• Powered by a 10-year sealed for life sealed lithium battery
• Completely wire free installation
• Uses RadioLINK™, RadioLINK+™ and SmartLINK™ wireless technology to interconnect to the rest of the alarm system
• Up to 12 alarms and devices can be interconnected
• Clear LED indicator icons for a visual display of fire or carbon monoxide alarm activation
• One button - three functions:
  TEST - Test alarms
  LOCATE - Identify triggered alarms
  SILENCE - Silence alarms
• Diagnostics and memory functions