Vent-Axia 453410 Luminair L White SELV Showerlight Fan Kit With Luminair L Showerlight Fan, LED Lamp, 90° Duct Air Outlet, 3m 100mm Flexible Ducting, External Wall Grille & Cable Ties For Remote Switching 3W 12V DiaØ: 150mm | Spigot DiaØ : 100mm

Vent-Axia 453410 Description

Features & Benefits:

• Unique fan and light combination
• IPX7 rated inlet assembly
• Suitable for shower enclosures and wet areas - can be used within reach of a person using a bath or shower
• Safety extra low voltage (SELV) lamp
• Easy installation
• BEAB Approved

Typical Specification

Supply and install a Luminair in-line fan and light kit combination. When installed the light complies with the 17th edition of IEE Regulations and an on site guide for Safety Extra Low Voltage (SELV) operation. The transformer should be safety insulating to BS EN 60742. The fan and transformer should be BEAB Approved.

The fan should meet the installed performance of the Building Regulation (Document F) Requirements - 15 litres a second for bathrooms and 6 litres for toilets, (15 minute timer overrun model for internal rooms).

The motor should be manufactured with self aligning sleeve bearings and fitted with Standard Thermal Overload Protection, (S.T.O.P.) the motor should be insulated to Class B.

FAQs Answered:

• The maximum length of 1.5mm2 cable between Transformer and fan is 8 metres
• All controls are included, no extra sensors needed
• Roof, wall and soffit terminations can be used
• Clearance above the ceiling must be at least 180mm
• Maximum 20W sealed lamp to be used