Manrose MF100S Mixflo Black 3 Speed Mixed Flow In-Line Fan For Remote Switching IPX4 240V Length: 298mm | Width: 162mm | Spigot DiaØ: 100mm

Manrose MF100S Description

The Manrose MF100S Mixflo is a powerful black 100mm IPX4 3 speed mixed flow centrifugal inline fan for remote switching that can be mounted in a variety of applications and is suitable for use with either rigid or flexible ducting.

Installed in the loft or ceiling void above the bathroom (or kitchen etc). Ducting is attached to each end of the fan with one length going to an internal grille in the ceiling and the other going to a grille on the external wall, soffit or roof. The extraction grille should be directly sited above the shower or bath, thus extracting the steam at source.

Designed to produce higher working pressures for applications that require high air flows, with low relative noise. Suitable for long duct runs up to 12m.

Offers vastly superior extraction to that of wall mounted axial fans. A powerful, 3-speed high quality ball bearing, long life motor can operate at low, medium and high speeds that produces no more than 24dB(A) making it one of the quietest fan available. Continuously rated and warranted for a minimum of 30,000 hours.

Easy installation and maintenance with the fan assembly easily removed from rigid ducting installations using the specially designed construction.

Controlled by remote ON/OFF light switch. The extraction rate of 245m³/hr leads the way in performance and power.

The MF100S inline fan is fully BEAB approved, building regulations compliant and has is IPX4 rated.

Manrose MF100S Features

• Manrose MF100S black 3 speed mixed flow in-line fan
• IPX4
• Black finish
• Loft or Ceiling-Mounted
• Double insulation - no earth required
• Operated in conjunction with a light switch
• 3 speed settings selected via internal dip switch
• High quality long life ball bearing motor
• Continuously rated
• Minimum lifetime of 30,000 hours
• Extraction Rate 245m³/hr
• Low noise: 22dB(A) at 3m
• Fully Building Code compliant
• Fully BEAB approved rated to IPX4
• Compact overall dimensions
• Dimensions: Length: 298mm | Width: 162mm | Spigot Diameter Ø: 100mm
• Easy installation and maintenance fan assembly easily removed from rigid ducting installations using the specially designed construction