Hager EEK510B Klik White Flush Mounting Round PIR Occupancy Sensor

Hager EEK510B Description

The Hager EEK510B Klik is a white indoor, flush mounting PIR occupancy sensor, with a 7m diameter detection range designed for installation primarily in suspended ceilings.

This high performance occupancy sensor is capable of wall switch override, meaning it can be configured as a presence or absence detector.

Presence detection mode allows lighting to be controlled ensuring that lighting is only energised when people are in the detection area.

Absence detection mode requires lighting to be activated by a wall switch or remote control to switch lighting on lighting then remains on during presence and switches off after time out period from last presence detection offers potentially the best energy savings.

Recommended for installation at a height of 2.5m, the sensor is suitable for a wide variety of applications, including residential and commercial premises where energy control or reduction is required.

Hager EEK510B Features

• Hager EEK510B white round flush mounting PIR occupancy senor
• Can operate for both presence and absence detection
• Integral photocell 5 - 1000 lux lux setting can be increased and decreased in increments of 100 lux
• Time delay before switching off and the luminosity level can set with potentiometers situated behind the discreet shutter
• Suitable for installation in suspended ceilings
• IP41 rated
• Diameter of the floor detection area: 7m
• Recommended installation height: 2.5m
• 360° detection angle
• Adjustable time delay - 1min - 1hour
• Breaking capacity 16A
• Operating temperature -10°C to +45°C
• For surface mount use EEK005 accessory
• Dimensions: Diameter Ø: 80mm | Height: 70mm