Heatrae Sadia 95.050.424 Multipoint ABS Instantaneous Water Heater Multipoint 7kW 240V
Heatrae Sadia's Multipoint 7kW compact instantaneous water heater (Order Code: 95.050.424) can supply a shower outlet and / or spray tap, provided only one outlet is used at a time. Ideal for supplying hot water to a remote area, such as a garage or cloakroom and is perfect for student and holiday accommodation.
within 5-7 working days
Heatrae Sadia 95050424 Description
Heatrae Sadia 95.050.424 Multipoint Instantaneous is a premium quality instantaneous water heater is a compact and ideal for supplying hot water to a remote area such as in a garage or cloakroom, either for a shower or over a sink or basin. Also widely used in commercial settings Multipoint Instantaneous is fitted with a safety cut-out to prevent overheating and has a moulded ABS vandal-resistant casing.
- Ideal for supplying hot water for bedsits, student accommodation and to remote areas
- White moulded vandal resistant ABS casing
- High temperature cut-out for safety
- NEMKO and Kiwa approved
- CE Marked
Controls
A pre-set safety cut-out set at 88°C (190°F) prevents overheating should abnormal conditions arise.
Casing
Moulded from white ABS.
Inner container
Glass reinforced plastic cylinder, complete with inlet / outlet connections and element. A drain plug is fitted to drain the container to prevent freezing if left in winter.
Approvals
BEAB and Kiwa approved. CE marked.
Fittings
A pressure relief valve set to relieve at 10 bar is provided together with a tee-piece which must be fitted on the heater outlet pipework. This valve MUST be connected to waste (drain) via a tundish and the drain pipe should fall continuously and be of 22mm bore discharging in a safe visible manner. The pipe must not be reduced in bore or blocked under any circumstances and it should be protected from frost.
Pressure range
Minimum: 1 bar.
Maximum: 7 bar.
Connections
½" BSP inlet and outlet.