Hager VML910CUSPDRK 10 Way Split Load Dual RCD Metal Consumer Unit with SPD

Hager VML910CUSPDRK Description

The Hager Design 10 VML910CUSPDRK is a white metal 10 module flexible high integrity surge protected twin RCD split load consumer unit with 100A double pole mains switch isolator, 2 x 100A 30mA Type A RCDs and round knockouts suitable for residential installations.

This unit is pre fitted with a Type 2 SPD device to protect against lightning strokes and over voltages. The SPD device protects connected electrical and electronic equipment against transients, originating from lightning, switching of transformers, lighting and motors. 

The high integrity layout allows RCBOs to be fitted separate to the RCDs for reduction of nuisance tripping on essential circuits and splitting earth leakage across multiple RCDs. The twin RCD split load configuration protects a configurable bank of 10 MCBs / RCBOs split into two circuits.

Designed for functionality and simplicity it accepts the latest quick release MCB's and RCBO's, which can be removed with busbar still in place. Ample cable space is available even when RCBOs are fitted.

The top mounted terminal rail makes the wiring of the neutral and earth connections neat and simple. Multiple top, bottom and rear round knockouts are available to ease installation and a full metal DIN rail ensure the devices sit square.

Supplied with a full complement of earth and neutral terminals along with marking labels, snap-able busbar and installations instructions.

The non-combustible enclosure has a plain door and is manufactured from steel with a high gloss and durable finish combined with clean lines and impressive styling. 

Fully compliant with the 18th Edition of BS 7671:2018 making it suitable for existing and new build installations.

Hager VML910CUSPDRK Features

• Hager VML910CUSPDRK metal 18 way flexible high integrity twin RCD split load consumer unit
• High integrity configuration suitable for installation of individual RCBOs for reduction of nuisance tripping
• Supplied with 100A DP Switch Isolator
• Controls the entire board and allows for up to 10 x RCBO's or MCB's circuits
• Supplied with 2 x 100A 30mA RCDs
• Allowing RCD circuits to be split around a building
• Supplied with factory fitted Type 2 SPD device
• 10 useable ways
• White high gloss metal enclosure with plain door
• Retained front cover screws prevent loss during installation
• IP Rating: IP2XC
• Accepts the latest Hager MCBs and miniature RCBOs
• Provides ample wiring space
• Full metal DIN rail assembly
• Snap-able busbar for a quick and easy circuit configuration
• Terminal bars are top mounted allowing for easy cable dressing - fully rated to 100A
• 18th Edition compliant
• Round cable entry knockouts on 5 sides (left, right, top, bottom and rear)
• Supplied with meter tail cable entry plate (VM04CE) as standard
• Cable entries positioned for easy access to devices
• Grommet strip protectors prevent damage to cable caused by sharp edges
• Incoming Line/Neutral terminal: 50mm² | Incoming Earth Terminal: 16mm²
• Supplied with marking labels and installations instructions.
• Standards: BS 7671:2018, BS EN 61439-3 including Annex ZB (16kA rating)
• Dimensions: Width: 406mm | Height: 246mm | Depth:100mm